Premium
Nanofiber‐Based Bulk‐Heterojunction Organic Solar Cells Using Coaxial Electrospinning
Author(s) -
Bedford Nicholas M.,
Dickerson Matthew B.,
Drummy Lawrence F.,
Koerner Hilmar,
Singh Kristi M.,
Vasudev Milana C.,
Durstock Michael F.,
Naik Rajesh R.,
Steckl Andrew J.
Publication year - 2012
Publication title -
advanced energy materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 10.08
H-Index - 220
eISSN - 1614-6840
pISSN - 1614-6832
DOI - 10.1002/aenm.201100674
Subject(s) - materials science , electrospinning , nanofiber , polymer solar cell , organic solar cell , polycaprolactone , energy conversion efficiency , chemical engineering , electron acceptor , coaxial , optoelectronics , polymer , nanotechnology , composite material , organic chemistry , chemistry , electrical engineering , engineering
Nanofibers consisting of the bulk heterojunction organic photovoltaic (BHJ–OPV) electron donor–electron acceptor pair poly(3‐hexylthiophene):phenyl‐C 61 ‐butyric acid methyl ester (P3HT:PCBM) are produced through a coaxial electrospinning process. While P3HT:PCBM blends are not directly electrospinnable, P3HT:PCBM‐containing fibers are produced in a coaxial fashion by utilizing polycaprolactone (PCL) as an electrospinnable sheath material. Pure P3HT:PCBM fibers are easily obtained after electrospinning by selectively removing the PCL sheath with cyclopentanone (average diameter 120 ± 30 nm). These fibers are then incorporated into the active layer of a BHJ–OPV device, which results in improved short‐circuit current densities, fill factors, and power‐conversion efficiencies (PCE) as compared to thin‐film devices of identical chemical composition. The best‐performing fiber‐based devices exhibit a PCE of 4.0%, while the best thin‐film devices have a PCE of 3.2%. This increase in device performance is attributed to the increased in‐plane alignment of P3HT polymer chains on the nanoscale, caused by the electrospun fibers, which leads to increased optical absorption and subsequent exciton generation. This methodology for improving device performance of BHJ–OPVs could also be implemented for other electron donor–electron acceptor systems, as nanofiber formation is largely independent of the PV material.