Premium
Reverse‐Offset Printing of Metal‐Nitrate‐Based Metal Oxide Semiconductor Ink for Flexible TFTs
Author(s) -
Leppäniemi Jaakko,
Sneck Asko,
Kusaka Yasuyuki,
Fukuda Nobuko,
Alastalo Ari
Publication year - 2019
Publication title -
advanced electronic materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 2.25
H-Index - 56
ISSN - 2199-160X
DOI - 10.1002/aelm.201900272
Subject(s) - materials science , printed electronics , thin film transistor , inkwell , flexible electronics , optoelectronics , polyimide , substrate (aquarium) , nanotechnology , semiconductor , layer (electronics) , composite material , oceanography , geology
Reverse‐offset printing (ROP) is a novel printing technique capable of forming electronics‐industry‐relevant linewidths (≈1 µm) with good thickness control and sharp edge definition. It is demonstrated that through a controlled oxygen‐plasma treatment, the energy of the surfaces related to the process steps of ROP can be optimized to allow the patterning of metal‐oxide semiconductor layers using a simple printing ink based on metal nitrates dissolved in an organic solvent. The steps of the ROP process are analyzed using surface‐energy measurements and Fourier transform infrared spectra of the ink during drying. Thin‐film transistors (TFTs) fabricated using a roll‐to‐plate ROP of In 2 O 3 semiconductor and evaporated Al source/drain (S/D) contacts show, on average, mobilities of 3.1 and 3.5 cm 2 V −1 s −1 , and ON/OFF‐ratios up to 10 8 and 10 7 on a Si/SiO 2 substrate and on a flexible polyimide‐type substrate, respectively. TFTs on the flexible substrate with also the S/D‐contacts printed with ROP using Ag nanoparticle ink exhibit a 1.4 cm 2 V −1 s −1 mobility. To demonstrate the scalability of the process, continuous lines of In 2 O 3 are printed using a roll‐to‐roll‐compatible (R2R) ROP with linewidths down to ≈2 µm. This process is expected to lead to miniaturized metal‐oxide circuits as required by flexible high‐resolution sensor arrays and displays.