Premium
Development of Highly Sensitive Ethane Gas Sensor Based on 3D WO 3 Nanocone Structure Integrated with Low‐Powered In‐Plane Microheater and Temperature Sensor
Author(s) -
Adib Md Ridwan,
Kondalkar Vijay V.,
Lee Keekeun
Publication year - 2020
Publication title -
advanced materials technologies
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 2.184
H-Index - 42
ISSN - 2365-709X
DOI - 10.1002/admt.202000009
Subject(s) - microheater , materials science , fabrication , planar , optoelectronics , responsivity , thin film , sputtering , nanotechnology , nanostructure , photodetector , medicine , computer graphics (images) , alternative medicine , pathology , computer science
Metal oxide nanostructures are the most promising materials for the fabrication of advanced gas sensors over two decades. Especially, reliable responsivity and selectivity for various harmful gases are the main requirements for the future chemiresistive‐type gas sensors. Here, a 3D nanocone (NC) of WO 3 for a real‐time ethane (C 2 H 6 ) gas sensor is reported. A compact WO 3 nanoparticles thin film deposited on the sensor interdigitate electrodes (IDEs) by using radio frequency (RF) sputter and subsequently, WO 3 thin film is converted into highly ordered 3D NC with simple monolayer of polystyrene. An in‐plane microheater integrated with a temperature sensor is also developed here in which the heater, temperature sensor, and the gas sensor share the same plane instead of a conventional vertical structure where the microheater and the sensor IDE are placed one above the other. Prior to the fabrication, COMSOL simulations are carried away to predict the heater performance and surface charge densities of the NC structures. A comparative study between the planar WO 3 and highly ordered 3D NC WO 3 in sensor response has been conducted. The fabricated sensors (planar WO 3 ) and 3D NC WO 3 show a high response Δ R / R (%) of 44% and 52% to 100 ppm of ethane at 200 °C respectively.