Premium
PEG Modified CsPbIBr 2 Perovskite Film for Efficient and Stable Solar Cells
Author(s) -
You Yibo,
Tian Wei,
Wang Min,
Cao Fengren,
Sun Haoxuan,
Li Liang
Publication year - 2020
Publication title -
advanced materials interfaces
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.671
H-Index - 65
ISSN - 2196-7350
DOI - 10.1002/admi.202000537
Subject(s) - materials science , peg ratio , energy conversion efficiency , band gap , perovskite (structure) , open circuit voltage , ethylene glycol , chemical engineering , halide , short circuit , optoelectronics , voltage , inorganic chemistry , chemistry , physics , finance , quantum mechanics , engineering , economics
Cesium lead mixed‐halide perovskite (CsPbIBr 2 ), as one of the all‐inorganic perovskites, has attracted great attention owing to its great ambient stability and suitable bandgap. Unfortunately, due to its low film coverage, high density of defects and unfavorable band energy level, the CsPbIBr 2 based solar cells suffer from low efficiency. In this work, the Lewis base poly(ethylene glycol) (PEG) is adopted as additive to modify the pure CsPbIBr 2 . By optimizing the molecular weight and dosage of PEG, the resultant PEG:CsPbIBr 2 film possesses suppressed non‐radiative electron–hole recombination, a favorable energy band structure and a weaker sensitive to the moisture. As a result, the device based on the PEG:CsPbIBr 2 yields a champion power conversion efficiency (PCE) of 11.10%, with a open‐circuit voltage of 1.21 V, a short‐circuit current of 12.25 mA cm −2 , and a fill factor of 74.82%, which is 44.3% higher than its counterpart without PEG. Moreover, the PEG modified device shows excellent long‐term stability, retaining over 90% of the initial efficiency after 600 h storage in ambient condition without encapsulation. In comparison, the device without PEG shows an inferior stability with PCE sharply dropping to 0% within 50 h.