Premium
Atomic Layer Deposition of Titanium Phosphate from Titanium Tetrachloride and Triethyl Phosphate onto Carbon Fibers
Author(s) -
Militzer Christian,
Buchsbaum Julia,
Dzhagan Volodymyr,
Zahn Dietrich R. T.,
Wulff Harm,
Helm Christiane A.,
Goedel Werner A.
Publication year - 2018
Publication title -
advanced materials interfaces
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.671
H-Index - 65
ISSN - 2196-7350
DOI - 10.1002/admi.201800423
Subject(s) - materials science , titanium , coating , titanium tetrachloride , x ray photoelectron spectroscopy , atomic layer deposition , phosphate , chemical engineering , inorganic chemistry , conformal coating , thermogravimetric analysis , layer (electronics) , metallurgy , composite material , organic chemistry , chemistry , engineering
A thermal atomic layer deposition (ALD) process for depositing titanium phosphate onto bundles of carbon fibers as well as flat silicon and germanium substrates using titanium tetrachloride and triethyl phosphate as precursors is presented. This process yields conformal coatings on all substrates used while having a growth per cycle of 0.22 nm cycle −1 , which is relatively high compared to other metal phosphate ALD processes. The reactions of the precursors with the surface are shown to be self‐limiting at 200 °C. Compositional analysis of the coating is performed using energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy, and Fourier‐transform infrared spectroscopy. It is shown that the as‐deposited coating has a chemical composition of Ti 3.0 PO 8.2 and a residual carbon content of 7%. Upon thermal annealing in air, residual triethyl phosphate and water is lost from the coating and phosphate can be identified up to 1000 °C. At temperatures exceeding 1000 °C, the coating starts to decompose. Thermogravimetric analysis of coated carbon fibers shows that the coating increases the onset temperature of the carbon fiber oxidation, thus providing an oxidation protection to the fibers.