Premium
A Robust, Freestanding MXene‐Sulfur Conductive Paper for Long‐Lifetime Li–S Batteries
Author(s) -
Tang Huan,
Li Wenlong,
Pan Limei,
Tu Kejun,
Du Fei,
Qiu Tai,
Yang Jian,
Cullen Conor P.,
McEvoy Niall,
Zhang Chuanfang John
Publication year - 2019
Publication title -
advanced functional materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 6.069
H-Index - 322
eISSN - 1616-3028
pISSN - 1616-301X
DOI - 10.1002/adfm.201901907
Subject(s) - materials science , cathode , electrical conductor , polysulfide , nanotechnology , lithium (medication) , flexible electronics , electrode , electronics , conductivity , layer (electronics) , fabrication , optoelectronics , chemical engineering , electrolyte , composite material , electrical engineering , engineering , medicine , chemistry , alternative medicine , pathology , endocrinology
Freestanding, robust electrodes with high capacity and long lifetime are of critical importance to the development of advanced lithium–sulfur (Li–S) batteries for next‐generation electronics, whose potential applications are greatly limited by the lithium polysulfide (LiPS) shuttle effect. Solutions to this issue have mostly focused on the design of cathode hosts with a polar, sulfurphilic, conductive network, or the introduction of an extra layer to suppress LiPS shuttling, which either results in complex fabrication procedures or compromises the mechanical flexibility of the device. A robust Ti 3 C 2 T x /S conductive paper combining the excellent conductivity, mechanical strength, and unique chemisorption of LiPSs from MXene nanosheets is reported. Importantly, repeated cycling initiates the in situ formation of a thick sulfate complex layer on the MXene surface, which acts as a protective membrane, effectively suppressing the shuttling of LiPSs and improving the utilization of sulfur. Consequently, the Ti 3 C 2 T x /S paper exhibits a high capacity and an ultralow capacity decay rate of 0.014% after 1500 cycles, the lowest value reported for Li–S batteries to date. A robust prototype pouch cell and full cell of Ti 3 C 2 T x /S paper // lithium foil and prelithiated germanium are also demonstrated. The preliminary results show that Ti 3 C 2 T x /S paper holds great promise for future flexible and wearable electronics.