Premium
Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)‐Based Composites by the Incorporation of Poly(methyl methacrylate)‐Functionalized Nanotubes
Author(s) -
Blond D.,
Barron V.,
Ruether M.,
Ryan K. P.,
Nicolosi V.,
Blau W. J.,
Coleman J. N.
Publication year - 2006
Publication title -
advanced functional materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 6.069
H-Index - 322
eISSN - 1616-3028
pISSN - 1616-301X
DOI - 10.1002/adfm.200500855
Subject(s) - materials science , composite material , carbon nanotube , methyl methacrylate , ultimate tensile strength , polymer , nanotube , poly(methyl methacrylate) , composite number , methacrylate , toughness , scanning electron microscope , flexural strength , surface modification , polymerization , chemical engineering , engineering
Poly(methyl methacrylate) (PMMA)‐functionalized multiwalled carbon nanotubes are prepared by in situ polymerization. Infrared absorbance studies reveal covalent bonding between polymer strands and the nanotubes. These treated nanotubes are blended with pure PMMA in solution before drop‐casting to form composite films. Increases in Young's modulus, breaking strength, ultimate tensile strength, and toughness of ×1.9, ×4.7, ×4.6, and ×13.7, respectively, are observed on the addition of less than 0.5 wt % of nanotubes. Effective reinforcement is only observed up to a nanotube content of approximately 0.1 vol %. Above this volume fraction, all mechanical parameters tend to fall off, probably due to nanotube aggregation. In addition, scanning electron microscopy (SEM) studies of composite fracture surfaces show a polymer layer coating the nanotubes after film breakage. The fact that the polymer and not the interface fails suggests that functionalization results in an extremely high polymer/nanotube interfacial shear strength.