Premium
Influence of Cooling Rates on the Microstructure and Mechanical Properties of Aluminum Titanate Flexible Ceramic
Author(s) -
Lian Jiawei,
Shan Qingliang,
Chen Weiwei,
Ma Qian,
Zeng Shenghui,
Xiong Hao,
Wang Yewei,
Xu Qiankun,
Shui Anze
Publication year - 2021
Publication title -
advanced engineering materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.938
H-Index - 114
eISSN - 1527-2648
pISSN - 1438-1656
DOI - 10.1002/adem.202100170
Subject(s) - materials science , microstructure , ceramic , composite material , aluminium , sintering , flexural strength , air cooling , flexibility (engineering) , thermodynamics , statistics , physics , mathematics
Herein, aluminum titanate (Al 2 TiO 5 , AT) flexible ceramics with different cooling rates (program‐controlling cooling (10 and 20 °C min −1 ), air cooling (≈400 °C min −1 ), and water cooling (>1000 °C min −1 ) are fabricated by reaction sintering of Al 2 O 3 and TiO 2 . The effect of cooling rates on microstructures and the mechanical properties of AT ceramics are systematically investigated. The microcrack width and density of AT ceramics with different cooling rates are statistically calculated. In addition, the effect of a microcracks structure on the mechanical properties of AT ceramics is deeply studied. Results show that the increase in cooling rate will increase the width and density of microcrack, leading to a suitable increase in flexibility and a slight decrease in strength. When AT is cooled in air, the best bending strain of 1.10% can be obtained, with a median microcrack width of 0.533 μm and a density of 6831.88 ± 374.87 N mm −2 . It is hopeful that through this research, the effect of cooling rate on the mechanical properties of AT flexible ceramics can be deeply understood, and the strategy used in this research can be used in other exploration of similar material.