Premium
Selective Laser Melting and Remelting of Pure Tungsten
Author(s) -
Xiong Zhengang,
Zhang Panpan,
Tan Chaolin,
Dong Dongdong,
Ma Wenyou,
Yu Kun
Publication year - 2020
Publication title -
advanced engineering materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.938
H-Index - 114
eISSN - 1527-2648
pISSN - 1438-1656
DOI - 10.1002/adem.201901352
Subject(s) - materials science , selective laser melting , tungsten , melting point , microstructure , brittleness , surface finish , surface roughness , laser , metallurgy , composite material , optics , physics
The processing of pure tungsten encounters a substantial challenge due to its high melting point and intrinsic brittleness. Selective laser melting (SLM) technique is gaining popularity and offers an excellent processing approach for refractory metals. Herein, dense pure tungsten specimens are produced by optimizing SLM processing parameters. The mechanical property of the SLM‐produced tungsten with an ultimate compressive strength of about 1200 MPa, which is obviously superior to that reported in other literature, is achieved. The increased laser energy input is instrumental in raising density and surface roughness of tungsten specimens. Interestingly, additional remelting of processed layers during SLM improves the surface quality and the microstructure and achieves the highest relative density (98.4% ± 0.5%). After laser remelting, the surface roughness is reduced by 28% and a large number of fine grains are obtained. The flow of fluids caused by remelting plays a decisive role in the formation of fine grains and the defect level. Therefore, these findings offer a new insight into SLM of pure tungsten.