Premium
Comparative Study of Pure Iron Manufactured by Selective Laser Melting, Laser Metal Deposition, and Casting Processes
Author(s) -
Carluccio Danilo,
Bermingham Michael,
Kent Damon,
Demir Ali Gökhan,
Previtali Barbara,
Dargusch Matthew S.
Publication year - 2019
Publication title -
advanced engineering materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.938
H-Index - 114
eISSN - 1527-2648
pISSN - 1438-1656
DOI - 10.1002/adem.201900049
Subject(s) - selective laser melting , materials science , casting , corrosion , deposition (geology) , metallurgy , grain size , laser , composite material , microstructure , optics , paleontology , physics , sediment , biology
Laser‐based additive manufacturing (AM) processes such as laser metal deposition (LMD) and selective laser melting (SLM) can produce patient‐specific implants with minimal post‐processing and shorter lead times compared to conventional manufacturing methods. In this study, the microstructural, mechanical, and corrosion properties of cast, LMD, and SLM manufactured pure Fe for biodegradable biomedical implants were compared. It was found that casting resulted in an average grain size double that of pure Fe manufactured via LMD and over 30 times that when compared to parts manufactured using SLM. This was attributed to the higher cooling rates of the laser‐based AM technologies and led to superior mechanical properties of the samples manufactured via SLM. The corrosion rate of the LMD and SLM samples were approximately 50% higher than the cast pure Fe. For biodegradable Fe implants, a higher corrosion rate and yield stress are preferential, and combined with the ability to produce complex geometries, makes SLM a promising manufacturing technology for biodegradable implants such as bone scaffolds.