Premium
3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites
Author(s) -
Abshirini Mohammad,
Charara Mohammad,
Liu Yingtao,
Saha Mrinal,
Altan M. Cengiz
Publication year - 2018
Publication title -
advanced engineering materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.938
H-Index - 114
eISSN - 1527-2648
pISSN - 1438-1656
DOI - 10.1002/adem.201800425
Subject(s) - materials science , polydimethylsiloxane , carbon nanotube , composite material , nanocomposite , piezoresistive effect , scanning electron microscope , substrate (aquarium) , ultimate tensile strength , elastomer , coating , layer (electronics) , geology , oceanography
This paper presents the additive manufacturing of a stretchable and electrically conductive polydimethylsiloxane (PDMS) nanocomposite for strain sensing. A long, thin PDMS strip in a zig‐zag pattern of five parallel lines is 3D printed on elastomer substrate using an in‐house modified 3D printer. Multi‐walled carbon nanotubes (MWCNTs) are uniformly deposited on the uncured PDMS lines and cured in an oven. An additional layer of PDMS is then applied on top of MWCNTs to form a thin protective coating. The 3D printed PDMS/MWCNT nanocomposites are characterized using a scanning electron microscope (SEM) to validate the thickness, uniformity, and microstructural features of the sensor cross‐section. The strain sensing capability of the nanocomposites is investigated under tensile cyclic loading at different strain rates and maximum strains. Long‐term performance is tested under cyclic tensile loads for 300 cycles. Sensing experiments indicate that under cyclic loading, the changes in piezo resistivity mimic the changes in the applied load and the measured material strain with high fidelity. In situ micro‐mechanical testing in SEM is carried to investigate the piezoresistive sensing mechanism. Due to the high flexibility of PDMS, the 3D printed sensors are tested to monitor the bending of a human wrist joint as a wearable sensor.