Premium
Acetabular Cup with a Trabecular Coating: A Novel Approach to a Monolithic Cup Made of One High‐Strength Ceramic Material
Author(s) -
Adjiski Ranko,
Mühlstädt Mike,
Maenz Stefan,
Arras Matthias M. L.,
Hans Karen,
Ortmann Claudia,
Oberbach Thomas,
Jandt Klaus D.,
Bossert Jörg
Publication year - 2018
Publication title -
advanced engineering materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.938
H-Index - 114
eISSN - 1527-2648
pISSN - 1438-1656
DOI - 10.1002/adem.201800230
Subject(s) - sintering , materials science , coating , ceramic , composite material , fabrication , shrinkage , porosity , layer (electronics) , cubic zirconia , compressive strength , medicine , alternative medicine , pathology
An advanced monolithic cup comprising a thin liner and a trabecular coating is a promising alternative to the current modular ceramic cups for hip replacements because it can be anchored directly to the human bone and features larger femoral heads allowing a greater range of motion. In this study, the authors propose a fabrication route for an advanced monolithic cup of only one high‐strength ceramic material by joining a partially sintered liner and a coating with a ceramic paste as an intermediate layer and subsequent sintering. The challenge here is to avoid the formation of defects at the coating/intermediate layer interfaces during classical sintering which is due to compressive tension constrained coating sintering in the initial sintering stages. In this study, the defect formation is minimized by sintering at constant low shrinkage rates, as this results in favorable compressive stresses in the coating in the initial sintering stages and a decrease in the differences in the densification rates. For the first time, by using the proposed route, the authors prepare an advanced monolithic cup of only alumina‐toughened zirconia (ATZ) that contains a coating with a porosity of 50 vol% and interconnected pores between 150 and 450 μm, as required for bone‐ingrowth.