Premium
Multifunctional FeCo/TiN Multilayer Thin Films with Combined Magnetic and Protective Properties
Author(s) -
Klever Christian,
Stüber Michael,
Leiste Harald,
Nold Eberhard,
Seemann Klaus,
Ulrich Sven,
Brunken Hayo,
Ludwig Alfred,
Thede Claas,
Quandt Eckhard
Publication year - 2009
Publication title -
advanced engineering materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.938
H-Index - 114
eISSN - 1527-2648
pISSN - 1438-1656
DOI - 10.1002/adem.200900214
Subject(s) - materials science , tin , physical vapor deposition , sputter deposition , thin film , composite material , coating , coercivity , optoelectronics , metallurgy , sputtering , nanotechnology , condensed matter physics , physics
Coatings with thicknesses ranging from a few nanometer up to several micrometer produced by physical vapor deposition (PVD) processes have been established in engineering technologies since the early 1980s. In particular, magnetron sputtered wear resistance coatings are industrially established and capable to enhance tool lifetimes significantly. However, in cases where optical inspection of a coating in use is not possible, an intrinsic sensor function of the film would be beneficial. Therefore, the development of wear resistant coatings with an integrated sensor functionality based on the insertion of a magnetoelastic ferromagnetic phase is suggested. In combination with appropriate read‐out electronics such a film system would be ready for online monitoring of the coatings' actual state (e.g., strain, temperature, volume loss). This paper focuses on the development of wear resistance coatings which simultaneously supply beneficial mechanical properties as well as ferromagnetic properties optimized for online non‐contact read‐out applications. Multilayer coatings obtained through alternate stacking of magnetron sputtered TiN and FeCo layers with a nominal total thickness of 1000 nm were produced as a model system meeting the above conditions. The bilayer period was varied down to 2.6 nm while the individual layer thickness ratio t TiN / t FeCo was determined by the deposition rates and maintained constant at a value of about 3/1. The films were vacuum annealed ex situ in a static magnetic field subsequent to the deposition. The constitution of the as‐deposited and annealed coatings as well as their mechanical (nanohardness, Young's modulus) and magnetic properties (magnetization hysteresis, frequency‐dependent permeability) are described. Finally, the suitability of the coatings for the use in remote‐interrogable wear sensor applications is briefly discussed.