z-logo
Premium
Seismic attenuation in partially saturated Berea sandstone submitted to a range of confining pressures
Author(s) -
Chapman Samuel,
Tisato Nicola,
Quintal Beatriz,
Holliger Klaus
Publication year - 2016
Publication title -
journal of geophysical research: solid earth
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.983
H-Index - 232
eISSN - 2169-9356
pISSN - 2169-9313
DOI - 10.1002/2015jb012575
Subject(s) - attenuation , saturation (graph theory) , overburden pressure , anelastic attenuation factor , geology , mesoscopic physics , mineralogy , mechanics , geotechnical engineering , optics , physics , condensed matter physics , mathematics , combinatorics
Using the forced oscillation method, we measure the extensional‐mode attenuation and Young's modulus of a Berea sandstone sample at seismic frequencies (0.5–50 Hz) for varying levels of water saturation (~0–100%) and confining pressures (2–25 MPa). Attenuation is negligible for dry conditions and saturation levels <80%. For saturation levels between ~91% and ~100%, attenuation is significant and frequency dependent in the form of distinct bell‐shaped curves having their maxima between 1 and 20 Hz. Increasing saturation causes an increase of the overall attenuation magnitude and a shift of its peak to lower frequencies. On the other hand, increasing the confining pressure causes a reduction in the attenuation magnitude and a shift of its peak to higher frequencies. For saturation levels above ~98%, the fluid pressure increases with increasing confining pressure. When the fluid pressure is high enough to ensure full water saturation of the sample, attenuation becomes negligible. A second series of comparable experiments reproduces these results satisfactorily. Based on a qualitative analysis of the data, the frequency‐dependent attenuation meets the theoretical predictions of mesoscopic wave‐induced fluid flow (WIFF) in response to a heterogeneous water distribution in the pore space, so‐called patchy saturation. These results show that mesoscopic WIFF can be an important source of seismic attenuation at reservoir conditions.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here