Premium
Electron Beam Curing of the System Cycloaliphatic Diepoxide‐Epoxidized Natural Rubber‐Glycidyl Methacrylate in Presence of Cationic Initiators
Author(s) -
Kumar R. N.,
Mehnert Reiner
Publication year - 2001
Publication title -
macromolecular materials and engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.913
H-Index - 96
eISSN - 1439-2054
pISSN - 1438-7492
DOI - 10.1002/1439-2054(200108)286:8<449::aid-mame449>3.0.co;2-r
Subject(s) - materials science , curing (chemistry) , natural rubber , composite material , glycidyl methacrylate , dynamic mechanical analysis , elastomer , glass transition , epoxy , polymer , methacrylate , cationic polymerization , polymer chemistry , polymerization
Electron beam curing of the system cycloaliphatic diepoxide‐epoxidized natural rubber‐glycidyl methacrylate containing a cationic initiator was carried out. Storage modulus, glass transition temperature and pendulum hardness were measured as function of EB dose, photoinitiator concentration, content of epoxidized natural rubber, post cure temperature and post cure time. At electron beam doses larger than 100 kGy a highly cross‐linked polymer network is generated which shows a two phase morphology. Microscale elastomeric domains are incorporated into a continuous epoxy resin phase. Dynamical mechanical analysis and pendulum hardness measurement show that an increase of the ENR ratio leads to a more elastic polymer network. Post curing results in increased glass transition temperatures. This EB cured polymer system is believed to provide both toughness and favorable viscoelastic properties to be used as component of EB curable composites.