Premium
Fast crystallization of liquid crystalline copolyesters based on poly(ethylene terephthalate)
Author(s) -
Liu Yongjian,
Jin Yi,
Bu Haishan,
Luise Robert R.,
Bu Jenny
Publication year - 2000
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/1097-4628(20010118)79:3<497::aid-app130>3.0.co;2-g
Subject(s) - crystallization , differential scanning calorimetry , materials science , terephthalic acid , polymer chemistry , ethylene , liquid crystal , chemical engineering , polyester , organic chemistry , chemistry , composite material , catalysis , thermodynamics , physics , engineering , optoelectronics
Crystallization of a series of liquid crystalline copolyesters prepared from p‐ hydroxybenzoic acid (HBA), hydroquinone (HQ), terephthalic acid (TA), and poly(ethylene terephthalate) (PET) was investigated by using differential scanning calorimetry (DSC). It was found that these copolyesters are more crystalline than copolyesters prepared from PET and HBA. Insertion of HQ–TA disrupts longer rigid‐rod sequences formed by HBA and thus enhances molecular motion and increases the crystallization rate. The effects of additives on the crystallization of the copolyesters were also studied. Sodium benzoate (SB) and sodium acetate (SA) increase the crystallization rate of the copolyesters at low temperature, but not at high temperature. It is most likely that liquid crystalline copolyesters do not need nucleating agents, and small aggregates of local‐oriented rodlike segments in nematic phase could act as primary nuclei. Chain scission of the copolyesters caused by the reaction with the nucleating agents was proved by the determination of intrinsic viscosity and by the IR spectra. Diphenylketone (DPK) was shown to effectively promote molecular motion of chains, leading to an increase in the crystallization rate at low temperature, but it decreased the crystallization rate at high temperature. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 497–503, 2001