z-logo
Premium
Effect of dynamic crosslinking on impact strength and other mechanical properties of polypropylene/ethylene‐propylene‐diene rubber blends
Author(s) -
Jain A. K.,
Nagpal A. K.,
Singhal R.,
Gupta Neeraj K.
Publication year - 2000
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/1097-4628(20001213)78:12<2089::aid-app50>3.0.co;2-h
Subject(s) - materials science , composite material , crazing , natural rubber , izod impact strength test , vulcanization , toughness , epdm rubber , polypropylene , flexural strength , flexural modulus , crystallinity , polymer , ultimate tensile strength
The deformation and fracture behavior of several dynamic vulcanizate blends of isotactic polypropylene with ethylene‐propylene‐diene rubber (EPDM) was examined and compared with those of uncrosslinked blends of PP/EPDM. These blends were prepared by melt mixing in an internal mixer at 190°C in a composition range of 10–40 wt % EPDM rubber. The variation in yield stress, the strength of fibrils of the craze, and the number density of the EPDM rubber domains (morphology fixation) that are dominant factors for enhancing interfacial adhesion and toughness in dynamic vulcanizate blends were evaluated. The ductility and toughness of these materials were explained in light of the composition between crack formation and the degree of plastic deformation through crazing and shear yielding. The physicomechanical properties including the hardness, yield stress, Young's modulus, percentage elongation, impact strength, flexural strength, and flexural modulus of dynamic vulcanized blends were found to be consistent and displayed higher values compared with uncrosslinked blends. The nucleation effect of the crosslinked particles and the decrease of crystallinity of the EPDM rubber were also considered to contribute to the improvement in the impact strength. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2089–2103, 2000

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here