Transient and steady‐state conduction in ethyl cellulose (EC)–poly(methyl methacrylate) (PMMA) blends

Transient discharging currents and steady‐state conduction in solution‐grown ethyl cellulose (EC)–poly(methyl methacrylate) (PMMA) blends measured as a function of temperature (30–80 °C) and field strength (10–100 kV cm −1 ) are reported. Transient currents are found to follow the Curie–VonSchweidler law, characterized by different slopes in short‐ and long‐time regions, having different decay constant values lying between 0.75–0.99, and 1.68–1.95. The corresponding activation energies are found to increase with time of measurement of discharge current. Isochronal characteristics (ie current versus temperature plots at constant times) constructed from the data seem to reveal a broad peak observed at 60 °C. The dependence of dark current at different temperatures (30–80 °C) in a metal (1)–EC–PMMA blend–metal (1)/(2) system on the applied voltage in the range 10–100 kV cm −1 has also been studied; the current is found to be strongly temperature dependent. Dipole polarization and space charge resulting from trapping of injected charge carriers in energetically distributed traps and induced dipoles created because of the piling up of charge carriers at the phase boundary of the heterogeneous components of the blend are considered to account for the observed transient currents. The results of current–voltage measurement on blends are interpreted to show that the low‐field steady‐state conduction is ohmic in nature, and in high fields the charge carriers are generated by field‐assisted lowering of coulombic barriers at the traps and are conducted through the bulk of the material by a hopping process between the localized states by a Jonscher–Ansari Poole–Frenkel mechanism. The modified P–F barrier is calculated to be 1.89 × 10 −19  J (1.18 eV), 1.92 × 10 −19  J (1.20 eV) and 1.95 × 10 −19  J (1.22 eV) for P 1 , P 2 and P 3 blends, respectively. © 2000 Society of Chemical Industry