Premium
Sound absorption by multi‐layered constructions composed of powder layers and porous sheets
Author(s) -
Okudaira Yuzo,
Ando Hideyuki,
Satoh Munetake,
Miyanami Kei
Publication year - 1998
Publication title -
electrical engineering in japan
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.136
H-Index - 28
eISSN - 1520-6416
pISSN - 0424-7760
DOI - 10.1002/(sici)1520-6416(19980130)122:2<1::aid-eej1>3.0.co;2-9
Subject(s) - materials science , absorption (acoustics) , noise reduction coefficient , composite material , porosity , acoustics , sound transmission class , vibration , reverberation , reverberation room , polyurethane , physics
Sound absorption coefficients for powder beds comprised of fine powders (white carbon and vermiculite) were determined using a reverberation room. The characteristic curves showed high peaks in the low‐frequency range, due to the excitation of longitudinal vibration modes in the powder beds by random incident sound. Multi‐layered constructions composed of powder layers and porous sound‐absorbing material (polyurethane foam sheets) were designed, and their sound absorption properties were investigated. Measurements showed that the multi‐layered constructions have high sound absorption peaks in the low‐frequency range, believed to be due to the combined effects of powder vibration and viscous dissipation in the pores of the polyurethane foam. The combination of two material possessing different sound absorption characteristics results in an expansion of the sound absorption frequency range and indicates the possibility of new sound absorbing materials for low‐frequency sound. Sound absorption simulation based on electric transmission line theory was applied to the multi‐layered constructions. The calculated results agreed well with the measured results. A simulation using the propagation constant and characteristic impedance of the constituent materials was found to be useful in designing the frequency characteristics of these constructions. © 1998 Scripta Technica. Electr Eng Jpn, 122(2): 1–11, 1998