Premium
Carbon fiber‐reinforced gelatin composites. I. Preparation and mechanical properties
Author(s) -
Wan Y. Z.,
Wang Y. L.,
Luo H. L.,
Cheng G. X.,
Yao K. D.
Publication year - 2000
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/(sici)1097-4628(20000222)75:8<987::aid-app2>3.0.co;2-2
Subject(s) - composite material , materials science , ultimate tensile strength , gelatin , composite number , fiber , elongation , chemistry , biochemistry
Composites were made from carbon fibers and gelatin using a solvent‐casting or solution‐impregnation technique. Relationships between the fiber volume fraction ( Vf ), glycerol (plasticizer) content, gelatin content, fiber form, and mechanical properties (tensile strength and modulus, elongation at break, and shear strength) of the composites were investigated. In long carbon fiber gelatin composite ( C L /Gel), tensile strength, modulus, and shear strength increased steadily with the Vf . In the case of a short carbon fiber gelatin composite ( C S /Gel), an initial improvement in tensile strength and modulus was followed by a reduction, whereas the shear strength improved with the Vf and then reached a constant value. The elongation decreased with the Vf for both composites. It is shown that C L /Gel had higher values of strength, modulus, and elongation than did C S /Gel at any Vf level. The effects of glycerol and gelatin contents on the mechanical properties of the composites were found to be much less significant as compared to the Vf . According to scanning electron microscopic observation of the fracture surfaces, the fibers were uniformly distributed in the gelatin matrix, but the interfacial adhesion between the gelatin matrix and the carbon fibers was not very good for both composites. Fiber surface modification would be necessary to further improve the mechanical properties of the two composites. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 987–993, 2000