Premium
Deformation kinetics of polypropylene hollow fibers in a continuous drawing process
Author(s) -
Lee Moo Seok,
Oh Tae Hwan,
Kim Sang Yong,
Shim Hyun Joo
Publication year - 1999
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/(sici)1097-4628(19991114)74:7<1836::aid-app28>3.0.co;2-h
Subject(s) - necking , materials science , polypropylene , deformation (meteorology) , isothermal process , composite material , strain rate , stress (linguistics) , polymer , constitutive equation , crystallinity , thermodynamics , physics , finite element method , linguistics , philosophy
Effects of isothermal drawing conditions on the deformation kinetics and dimensional change of polypropylene (PP) hollow fibers in a continuous drawing process were investigated. The deformation behavior of solid PP polymers during stretching between two rolls in the isothermal bath was analyzed by a simple model describing the continuous drawing process with a constitutive relation that can express a true (stress–strain–strain rate) surface of solid semicrystalline polymers. Necking profiles during drawing can be calculated from this model without any special assumption for neck criterion, and the calculated results predict that the localization of deformation is promoted with the increase of applied draw ratios. It is also found that at 20°C, the neck is observed apparently both from the calculated and experimental results, and the strain‐rate sensitivity parameter is considered to be a critical factor that determines the intensity of the neck geometry. The calculated drawing forces are shown to increase with increasing the applied draw ratio and decreasing the drawing temperature, and these trends were verified by experimental results. The hollowness, defined as the ratio of inner to total cross‐sectional area, increases as it is drawn at 30°C, but decreases as drawn above this temperature compared with that of the undrawn fiber. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1836–1845, 1999