Premium
Segmented and nonsegmented polyurethanes: Polyaddition products of 4,4′‐bis(2‐hydroxyethoxy)diphenyl ether and 1,6‐hexanediisocyanate
Author(s) -
Wdowicka D.,
Podkościelny W.,
Pikus S.
Publication year - 1999
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/(sici)1097-4628(19990103)71:1<83::aid-app11>3.0.co;2-z
Subject(s) - differential scanning calorimetry , polymer chemistry , gel permeation chromatography , materials science , ether , thermogravimetric analysis , fourier transform infrared spectroscopy , monomer , shore durometer , solvent , polymer , oxide , chemical engineering , chemistry , organic chemistry , composite material , physics , thermodynamics , metallurgy , engineering
New linear polyurethanes (PUs) derived from 4,4′‐bis(2‐hydroxyethoxy)diphenyl ether (4‐HEDE) and 1,6‐hexanediisocyanate (HDI) were synthesized by either melt or solution polymerization. We found that the properties of PUs obtained are dependent mainly on the kind of organic solvent, contribution of the catalyst, and concentration of the monomers used. Good results are obtained using aprotic solvent‐ N,N ‐dimethylformamide, ∼ 30 wt % concentration of monomers, dibutyltin dilaurate as a catalyst, and conducting the process at 90–100°C for 4 h. This article presents basic properties of the series of PUs obtained. Thermal properties of the polymers were investigated by means of thermal gravimetric analysis and differential scanning calorimetry. Molecular weight distribution was determined by gel permeation chromatography. Shore hardness and tensile test results are also presented. The structure of the resulting products was confirmed by elemental analysis, Fourier transform infrared spectroscopy and X‐ray diffractometry. We also present the properties of copolyurethanes type 4‐HEDE/HDI/1,6‐hexanediol or 4‐HEDE/HDI/polytetramethylene oxide containing variable amounts of 1,6‐hexanediol or polytetramethylene oxide ( M n ∼ 650) synthesized in the optimal conditions established earlier for PU 4‐HEDE/HDI. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 83–91, 1999