Premium
Properties and interfacial bonding of regenerated cellulose films coated with polyurethane–chitosan IPN coating
Author(s) -
Gong Ping,
Zhang Lina
Publication year - 1998
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/(sici)1097-4628(19980523)68:8<1313::aid-app13>3.0.co;2-#
Subject(s) - polyurethane , coating , chitosan , materials science , cellulose , chemical engineering , regenerated cellulose , composite material , polymer chemistry , polymer science , engineering
Water‐resistant films were prepared by coating a castor oil‐based polyurethane–chitosan (PU–CH), in which grafted interpenetrating polymer networks (IPNs) were produced, on a regenerated cellulose (RC) film. The tensile strengths of the coated films cured at 90°C for 5 min reached 853 kg cm −2 (dry state) and 503 kg cm −2 (wet state) and were obviously higher than those of the films of uncoated and coated with PU coating. Moreover, the coated films have excellent water resistivity, low vapor permeability, and good size stability, and their optical transmittance is even better than that of the RC film in the range of 400–800 nm. The interfacial structure of the coated films was investigated by using spectroscopy infrared, ultraviolet spectroscopy, transmission electron microscopy, and electron probe microanalysis. It was shown that the strong interfacial bonding with chemical and hydrogen bonds between the RC film and the coating exists. The PU prepolymer in the IPN coating penetrated through the interface into the RC film and partly crosslinked with the cellulose, forming a semi‐IPNs. The chitosan in the PU–CH coating plays an important role not only in accelerating the cure of the coating but also in improving the mechanical properties and biodegradability of the coated film. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1313–1319, 1998