Premium
Atmospheric pressure chemical ionization liquid chromatography/mass spectrometry in cholesterol oxide determination and characterization
Author(s) -
Manini P.,
Andreoli R.,
Careri M.,
Elviri L.,
Musci M.
Publication year - 1998
Publication title -
rapid communications in mass spectrometry
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.528
H-Index - 136
eISSN - 1097-0231
pISSN - 0951-4198
DOI - 10.1002/(sici)1097-0231(19980715)12:13<883::aid-rcm249>3.0.co;2-2
Subject(s) - chemistry , atmospheric pressure chemical ionization , chromatography , analytical chemistry (journal) , mass spectrometry , chemical ionization , detection limit , direct electron ionization liquid chromatography–mass spectrometry interface , atmospheric pressure , particle beam , analyte , liquid chromatography–mass spectrometry , calibration curve , ionization , ion , beam (structure) , oceanography , organic chemistry , geology , physics , optics
An atmospheric pressure chemical ionization liquid chromatography/mass spectrometry (APCI‐LC/MS) system was evaluated for the analysis of cholesterol oxidation products (COPs). High performance liquid chromatography separation of these compounds was performed under reversed‐phase chromatographic conditions at 1 mL/min flow rate. Useful mass spectra for confirmation and quantitation purposes were obtained with positive‐ion detection. The influence of several parameters, such as the temperature of the heated nebulizer interface, the voltage applied to the orifice and to the ring electrode on the mass spectra of the analytes, was studied and optimized in order to obtain the best sensitivity. Linearity, sensitivity and precision of the method were determined operating in the selected‐ion monitoring mode. Detection limits were in the range 0.2–0.8 ng for all the compounds with linear calibration graphs in the 0.1–10 mg/L concentration range. The method was applied to the quantitative analysis of COPs in lyophilized beef preparations, and results were compared with those obtained using LC/UV and LC/MS with particle beam interface. © 1998 John Wiley & Sons, Ltd.