Premium
Effect of Sandospace R on the dyeability of gamma‐irradiated wool, wool/polyester and polyester fabrics with some disperse dyes containing amino groups
Author(s) -
Zohdy Maged H.
Publication year - 1998
Publication title -
polymer international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.592
H-Index - 105
eISSN - 1097-0126
pISSN - 0959-8103
DOI - 10.1002/(sici)1097-0126(1998100)47:2<165::aid-pi42>3.0.co;2-y
Subject(s) - dyeing , polyester , wool , disperse dye , materials science , irradiation , nuclear chemistry , absorption (acoustics) , polymer chemistry , composite material , chemical engineering , chemistry , engineering , physics , nuclear physics
The effect of Sandospace R on the dyeability of gamma‐irradiated wool, wool/polyester and polyester fabrics towards disperse dyes has been investigated. The effects of the different factors that may affect the colour yield of the dyed samples (such as radiation dose, Sandospace R concentration, pH strength of the dye bath, dye concentration, dyeing temperature and time were studied. In general, and regardless of the studied factor, the irradiated fabric showed a significant dye affinity for the disperse dyes employed compared/to the unirradiated fabrics. However, the different fabrics irradiated to a dose of 2Mrad showed the highest colour strength with a high level of dyeing. Also, it was observed that a concentration of Sandospace R as low as 0·5% effectively enhances the dye affinity for the disperse dyes used here. Moreover, it was found that the pH of the dyeing bath at which the highest colour strength obtained was 3. Increasing the dye concentration up to 4% based on fabric weight, caused a significant enhancement in the colour strength, whilst raising/the dyeing bath temperature from 60°C to 100°C appreciably accelerated the rate of dye uptake. Complete exhaustion absorption of the disperse dye occurred over a period of 2h. © 1998 Society of Chemical Industry