Alkalinity to calcium flux ratios for corals and coral reef communities: variances between isolated and community conditions

Calcification in reef corals and coral reefs is widely measured using the alkalinity depletion method which is based on the fact that two protons are produced for every mole of CaCO 3 precipitated. This assumption was tested by measuring the total alkalinity (TA) flux and Ca 2+ flux of isolated components (corals, alga, sediment and plankton) in reference to that of a mixed-community. Experiments were conducted in a flume under natural conditions of sunlight, nutrients, plankton and organic matter. A realistic hydrodynamic regime was provided. Groups of corals were run separately and in conjunction with the other reef components in a mixed-community. The TA flux to Ca 2+ flux ratio ( Δ TA: Δ Ca 2+ ) was consistently higher in the coral-only run (2.06 ± 0.19) than in the mixed-community run (1.60 ± 0.14, p -value = 0.011). The pH was higher and more stable in the mixed-community run (7.94 ± 0.03 vs. 7.52 ± 0.07, p -value = 3 × 10 −5 ). Aragonite saturation state ( Ω arag ) was also higher in the mixed-community run (2.51 ± 0.2 vs. 1.12 ± 0.14, p -value = 2 × 10 −6 ). The sediment-only run revealed that sediment is the source of TA that can account for the lower Δ TA: Δ Ca 2+ ratio in the mixed-community run. The macroalgae-only run showed that algae were responsible for the increased pH in the mixed-community run. Corals growing in a mixed-community will experience an environment that is more favorable to calcification (higher daytime pH due to algae photosynthesis, additional TA and inorganic carbon from sediments, higher Ω arag ). A paradox is that the alkalinity depletion method will yield a lower net calcification for a mixed-community versus a coral-only community due to TA recycling, even though the corals may be calcifying at a higher rate due to a more optimal environment.