METHODS OF INTRODUCING ALLOYING ELEMENTS INTO LIQUID MAGNESIUM

In recent years, magnesium alloys have gained widespread popularity as construction materials. This is due to their low density, high strength properties, and advances in their production technology. Properties of magnesium alloys depend primarily on the type, quantity, and quality of elements present in their composition. It is therefore necessary to carry out research on the further optimisation of the production technology of these alloys. This article presents the results of studies carried out in order to determine the type, form, and parameters of the process of introducing selected alloying elements to magnesium in a manner which enables the manufacture of alloys with predetermined chemical composition. As part of the work, elements such as Al, Zn, Mn, Zr, Si, Cu, Ca, as well as rare earth elements (RE) were introduced into the liquid magnesium. The alloying elements were introduced into the melt at different temperatures in either a metallic form or as master alloys. While conducting studies, respective solubility graphs were plotted for the alloying elements showing the time taken for each element to dissolve to the required form at a specific temperature and concentration. The studies resulted in the development of several techniques of introducing selected alloying elements, which enabled the manufacture of various types of alloys.