Effect of Stagnation Temperature on Supersonic Flow Parameters with Application for Air in Nozzles

The obtained results of a supersonic perfect gas flow presented in (Anderson, 1982, 1988 & Ryhming, 1984), are valid under some assumptions. One of the assumptions is that the gas is regarded as a calorically perfect, i. e., the specific heats CP is constant and does not depend on the temperature, which is not valid in the real case when the temperature increases (Zebbiche & Youbi, 2005b, 2006, Zebbiche, 2010a, 2010b). The aim of this research is to develop a mathematical model of the gas flow by adding the variation effect of CP and γ with the temperature. In this case, the gas is named by calorically imperfect gas or gas at high temperature. There are tables for air (Peterson & Hill, 1965) for example) that contain the values of CP and γ versus the temperature in interval 55 K to 3550 K. We carried out a polynomial interpolation of these values in order to find an analytical form for the function CP(T). The presented mathematical relations are valid in the general case independently of the interpolation form and the substance, but the results are illustrated by a polynomial interpolation of the 9th degree. The obtained mathematical relations are in the form of nonlinear algebraic equations, and so analytical integration was impossible. Thus, our interest is directed towards to the determination of numerical solutions. The dichotomy method for the solution of the nonlinear algebraic equations is used; the Simpson’s algorithm (Démidovitch & Maron, 1987 & Zebbiche & Youbi, 2006, Zebbiche, 2010a, 2010b) for numerical integration of the found functions is applied. The integrated functions have high gradients of the interval extremity, where the Simpson’s algorithm requires a very high discretization to have a suitable precision. The solution of this problem is made by introduction of a condensation procedure in order to refine the points at the place where there is high gradient. The Robert’s condensation formula presented in (Fletcher, 1988) was chosen. The application for the air in the supersonic field is limited by the threshold of the molecules dissociation. The comparison is made with the calorically perfect gas model. The problem encounters in the aeronautical experiments where the use of the nozzle designed on the basis of the perfect gas assumption, degrades the performances. If during the experiment measurements are carried out it will be found that measured parameters are differed from the calculated, especially for the high stagnation temperature. Several reasons