Warm Pressurant Gas Effects on the Static Bubble Point Pressure for Cryogenic LADs
Author(s) -
Jason Hartwig,
David J. Chato,
John McQuillen
Publication year - 2014
Publication title -
49th aiaa/asme/sae/asee joint propulsion conference
Language(s) - English
Resource type - Conference proceedings
DOI - 10.2514/6.2014-3992
Subject(s) - bubble , bubble point , gas bubble , cryogenics , mechanics , point (geometry) , materials science , physics , thermodynamics , mathematics , geometry
This paper presents experimental results for the liquid hydrogen and nitrogen bubble point tests using warm pressurant gases conducted at the NASA Glenn Research Center. The purpose of the test series was to determine the effect of elevating the temperature of the pressurant gas on the performance of a liquid acquisition device (LAD). Three fine mesh screen samples (325x2300, 450x2750, 510x3600) were tested in liquid hydrogen and liquid nitrogen using cold and warm non-condensable (gaseous helium) and condensable (gaseous hydrogen or nitrogen) pressurization schemes. Gases were conditioned from 0K - 90K above the liquid temperature. Results clearly indicate degradation in bubble point pressure using warm gas, with a greater reduction in performance using condensable over non-condensable pressurization. Degradation in the bubble point pressure is inversely proportional to screen porosity, as the coarsest mesh demonstrated the highest degradation. Results here have implication on both pressurization and LAD system design for all future cryogenic propulsion systems. A detailed review of historical heated gas tests is also presented for comparison to current results.
Accelerating Research
Robert Robinson Avenue,
Oxford Science Park, Oxford
OX4 4GP, United Kingdom
Address
John Eccles HouseRobert Robinson Avenue,
Oxford Science Park, Oxford
OX4 4GP, United Kingdom