z-logo
open-access-imgOpen Access
Impermeable thin AI2O3 overlay for TBC protection from sulfate and vanadate attack in gas turbines
Author(s) -
Scott X. Mao
Publication year - 2005
Language(s) - English
Resource type - Reports
DOI - 10.2172/877397
Subject(s) - materials science , corrosion , coating , scanning electron microscope , spallation , yttria stabilized zirconia , microstructure , thermal spraying , glaze , metallurgy , x ray photoelectron spectroscopy , spall , analytical chemistry (journal) , composite material , ceramic , chemical engineering , cubic zirconia , chemistry , physics , chromatography , quantum mechanics , neutron , engineering
In order to improve the hot corrosion resistance of conventional YSZ TBC system, a dense and continues overlay of Al{sub 2}O{sub 3} coating of about 0.1-25 {micro}m thick was deposited on the surface of TBC by EB-PVD, high velocity oxy-fuel (HVOF) spray and composite-sol-gel (CSG) techniques. Hot corrosion tests were carried out on the TBC with and without Al{sub 2}O{sub 3} coating in molten salts mixtures (Na{sub 2}SO{sub 4} + 5%V{sub 2}O{sub 5}) at 950 C for 10h. The microstructures of TBC and overlay before and after exposure were examined by means of scanning electron microscopy (SEM), energy-dispersive X-ray spectrometer (EDX), X-ray diffraction (XRD) and secondary ion mass spectrometry (SIMS). In order to investigate the effect of Al{sub 2}O{sub 3} overlay on degradation and spalling of the TBC, indentation test has been employed to study spallation behaviors of YSZ coating with and without Al{sub 2}O{sub 3} overlay. It has been found that TBC will react with V{sub 2}O5 to form YVO{sub 4} in hot corrosion tests. A substantial amount of M-phase of ZrO{sub 2} was formed due to the leaching of Y{sub 2}O{sub 3} from YSZ. During hot corrosion test, there were no significant interactions between overlay Al{sub 2}O{sub 3} coating and molten salts. After exposure, the alumina coating, especially produced by HVOF, was still very dense and cover the surface of YSZ, although they had been translated to {alpha} - Al{sub 2}O{sub 3} from original {gamma} - Al{sub 2}O{sub 3}. As a result, Al{sub 2}O{sub 3} overlay coating decreased the penetration of salts into the YSZ and prevented the YSZ from the attack by molten salts containing vanadium. Accordingly, only a few M-phase was formed in YSZ TBC, compared with TBC without overlay coating. The penetration of salts into alumina coating was thought to be through microcracks formed in overlay Al{sub 2}O{sub 3} coating and at the interface between alumina and zirconia due to the presence of tensile stress in the alumina coating. Al{sub 2}O{sub 3} overlay acted as a barrier against the infiltration of the molten salt into the YSZ coating during exposure, thus significantly reduced the amount of M-phase of ZrO{sub 2} in YSZ coating. However, a thick Al{sub 2}O{sub 3} overlay was harmful for TBC by increasing compressive stress which causes crack and spalling of YSZ coating. As a result, a dense and thin Al{sub 2}O{sub 3} overlay is critical for simultaneously preventing YSZ from hot corrosion and spalling

The content you want is available to Zendy users.

Already have an account? Click here to sign in.
Having issues? You can contact us here