Open AccessAcceptance Test Report for Fourth Generation Hanford Corrosion Monitoring System
Author(s) -
E.C. NORMAN
Publication year - 2000
Language(s) - English
Resource type - Reports
DOI - 10.2172/805374
Subject(s) - corrosion , cabinet (room) , corrosion monitoring , instrumentation (computer programming) , engineering , electrical engineering , computer science , mechanical engineering , materials science , metallurgy , operating system
This Acceptance Test Report (ATR) will document the satisfactory operation of the corrosion probe cabinets destined for installation on tanks 241-AN-102 and 241-AN-107. This ATR will be performed by the manufacturer on each cabinet prior to delivery to the site. The objective of this procedure is to demonstrate and document the acceptance of the corrosion monitoring cabinets to be installed on tanks 241-AN-102 and 241-AN-107. One cabinet will be installed on each tank. Each cabinet will contain corrosion monitoring hardware to be connected to existing corrosion probes already installed in each tank. The test will consist of a continuity test of the cabinet wiring from the end of cable to be connected to corrosion probe, through the appropriate intrinsic safety barriers and out to the 15 pin D-shell connectors to be connected to the corrosion monitoring instrument. Additional testing will be performed using a constant current and voltage source provided by the corrosion monitoring hardware manufacturer to verify proper operation of corrosion monitoring instrumentation (input a known signal and see if the instrumentation records the proper value)