Open AccessScaled Vitrification System III (SVS III) Process Development and Laboratory Tests at the West Valley Demonstration Project
Author(s) -
V.K. Jain,
Steven Barnes,
Bianca Bindi,
Richard A. Palmer
Publication year - 2000
Language(s) - English
Resource type - Reports
DOI - 10.2172/766176
Subject(s) - vitrification , environmental science , waste management , nuclear engineering , process (computing) , process engineering , process development , engineering , computer science , nuclear physics , physics , operating system
At the West Valley Demonstration Project (WVDP),the Vitrification Facility (VF)is designed to convert the high-level radioactive waste (HLW)stored on the site to a stable glass for disposal at a Department of Energy (DOE)-specified federal repository. The Scaled Vitrification System III (SVS-III)verification tests were conducted between February 1995 and August 1995 as a supplemental means to support the vitrification process flowsheet, but at only one seventh the scale.During these tests,the process flowsheet was refined and optimized. The SVS-III test series was conducted with a focus on confirming the applicability of the Redox Forecasting Model, which was based on the Index of Feed Oxidation (IFO)developed during the Functional and Checkout Testing of Systems (FACTS)and SVS-I tests. Additional goals were to investigate the prototypical feed preparation cycle and test the new target glass composition. Included in this report are the basis and current designs of the major components of the Scale Vitrification System and the results of the SVS-III tests.The major subsystems described are the feed preparation and delivery, melter, and off-gas treatment systems. In addition,the correlation between the melter's operation and its various parameters;which included feed rate,cold cap coverage,oxygen reduction (redox)state of the glass,melter power,plenum temperature,and airlift analysis;were developed