Open AccessScoping corrosion tests on candidate waste package basket materials for the Yucca Mountain Project
Author(s) -
R.A. Van Konynenburg,
P C Curits,
T Summers
Publication year - 1998
Language(s) - English
Resource type - Reports
DOI - 10.2172/641112
Subject(s) - corrosion , dissolution , materials science , metallurgy , zirconium , boron , boron carbide , oxide , ceramic , copper , nuclear chemistry , chemical engineering , chemistry , organic chemistry , engineering
A scoping corrosion test was performed on candidate waste package basket materials. The corrosion medium was a pH-buffered solution of chemical species expected to be produced by radiolysis. The test was conducted at 90{degrees}C for 96 hours. Samples included aluminum-, copper-, stainless steel-, and zirconium-based metallic materials and several ceramics, incorporating neutron-absorbing elements. Sample weight losses and solution chemical changes were measured. Both corrosion of the host materials and dissolution of the neutron- absorbing elements were studied. The ceramics and the zirconium-based materials underwent only minor corrosion. the stainless steel-based materials performed well except for a welded sample. The aluminum- and copper-based materials exhibited the highest corrosion rates. Boron dissolution depends on it chemical form. Boron oxide and many metal borides dissolve readily in acidic solutions while high- chromium borides and boron carbide, though thermodynamically unstable, exhibit little dissolution in short times. the results of solution chemical analyses were consistent with this. Gadolinium did not dissolve significantly from monazite, and hafnium showed little dissolution from a variety of host materials, in keeping with its low solubility