Open AccessInfluence of long-term thermal aging on the microstructural evolution of nuclear reactor pressure vessel materials: An atom probe study
Author(s) -
Philippe Pareige,
K.F. Russell,
Roger E. Stoller,
M.K. Miller
Publication year - 1998
Language(s) - English
Resource type - Reports
DOI - 10.2172/573374
Subject(s) - atom probe , cementite , materials science , metallurgy , carbide , charpy impact test , microstructure , tempering , pressure vessel , reactor pressure vessel , precipitation , composite material , austenite , nuclear engineering , physics , meteorology , engineering
Atom probe field ion microscopy (APFIM) investigations of the microstructure of unaged (as-fabricated) and long-term thermally aged ({approximately} 100,000 h at 280 C) surveillance materials from commercial reactor pressure vessel steels were performed. This combination of materials and conditions permitted the investigation of potential thermal-aging effects. This microstructural study focused on the quantification of the compositions of the matrix and carbides. The APFIM results indicate that there was no significant microstructural evolution after a long-term thermal exposure in weld, plate, or forging materials. The matrix depletion of copper that was observed in weld materials was consistent with the copper concentration in the matrix after the stress-relief heat treatment. The compositions of cementite carbides aged for 100,000 h were compared with the Thermocalc{trademark} prediction. The APFIM comparisons of materials under these conditions are consistent with the measured change in mechanical properties such as the Charpy transition temperature