z-logo
open-access-imgOpen Access
Optimizing the air flotation water treatment process. Final report, May 1997
Author(s) -
Bill Barnett
Publication year - 1998
Language(s) - English
Resource type - Reports
DOI - 10.2172/296689
Subject(s) - wellhead , dissolved air flotation , suspended solids , backwashing , environmental science , filtration (mathematics) , water treatment , silt , waste management , environmental engineering , petroleum engineering , wastewater , engineering , geology , inlet , mechanical engineering , statistics , mathematics , paleontology
The injection water for the Nelson Project is a combination of produced and make-up water, typical of many Eastern Kansas operations. The make-up water is a low-salinity salt water from the Arbuckle Formation and contains dissolved minerals and sulfides. The produced water contains suspended oil, suspended clay and silt particles, along with a combination of other dissolved minerals. The combination of the two waters causes several undesirable reactions. The suspended solids load contained in the combined waters would plug a 75-micron plant bag filter within one day. Wellhead filters of 75-micron size were also being used on the injection wells. The poor water quality resulted in severe loss of injectivity and frequent wellbore cleaning of the injection wells. Various mechanical and graded-bed filtration methods were considered for cleaning the water. These methods were rejected due to the lack of field equipment and service availability. A number of vendors did not even respond to the author`s request. The air flotation process was selected as offering the best hope for a long-term solution. The objective of this work is to: increase the cost effectiveness of the process through optimizing process design factors and operational parameters. A vastly modified air flotation system is the principal tool for accomplishing the project objective. The air flotation unit, as received from manufacturer Separation Specialist, was primarily designed to remove oil from produced water. The additional requirement for solids removal necessitated major physical changes in the unit. Problems encountered with the air flotation unit and specific modifications are detailed in the body of the report

The content you want is available to Zendy users.

Already have an account? Click here to sign in.
Having issues? You can contact us here