Open AccessHydrogen permeation resistant heat pipe for bi-modal reactors. Final report, October 1, 1994--September 30, 1995
Author(s) -
Mark T. North,
William G. Anderson
Publication year - 1995
Language(s) - English
Resource type - Reports
DOI - 10.2172/238547
Subject(s) - heat pipe , materials science , hydrogen , permeation , condenser (optics) , loop heat pipe , micro loop heat pipe , nuclear engineering , heat transfer , thermodynamics , engineering , chemistry , physics , light source , biochemistry , organic chemistry , membrane , optics
The principal objective of this program was to demonstrate technology that will make a sodium heat pipe tolerant of hydrogen permeation for a bimodal space reactor application. Special focus was placed on techniques which enhance the permeation of hydrogen out of the heat pipe. Specific objectives include: define the detailed requirements for the bimodal reactor application; design and fabricate a prototype heat pipe tolerant of hydrogen permeation; and test the prototype heat pipe and demonstrate that hydrogen which permeates into the heat pipe is removed or reduced to acceptable levels. The results of the program were fully successful. Analyses were performed on two different heat pipe designs and an experimental heat pipe was fabricated and tested. A model of the experimental heat pipe was developed to predict the enhancement in the hydrogen permeation rate out of the heat pipe. A significant improvement in the rate at which hydrogen permeates out of a heat pipe was predicted for the use of the special condenser geometry developed here. Agreement between the model and the experimental results was qualitatively good. Inclusion of the additional effects of fluid flow in the heat pipe are recommended for future work