z-logo
open-access-imgOpen Access
Catalytic reduction of SO{sub 2} with methane over molybdenum catalyst. Quarterly report, 1 December 1994--28 February 1995
Author(s) -
Tomasz Wiltowski
Publication year - 1995
Language(s) - English
Resource type - Reports
DOI - 10.2172/207026
Subject(s) - catalysis , molybdenum , methane , activated carbon , x ray photoelectron spectroscopy , sulfide , coal , carbon fibers , sulfur , chemistry , degree (music) , selective catalytic reduction , inorganic chemistry , materials science , chemical engineering , adsorption , organic chemistry , composite material , physics , engineering , composite number , acoustics
One of the primary concerns in coal utilization is the emission of sulfur compounds, especially SO{sub 2}. This project deals with catalytic reduction of SO{sub 2} with methane using molybdenum sulfide catalyst supported on different activated carbons: Darco TRS, Norit ROZ-3, and an activated carbon prepared from Illinois coal IBC-110. The work conducted during this quarter has concentrated on continuation of the synthesis of activated carbon derived from Illinois coal IBC-110, modification and improvement of the apparatus for the catalyst testing, ESCA (XPS) analysis of the catalyst (10% MoS{sub 2} on Darco TRS activated carbon), and experiments in the temperature range of 450{degree}C--600{degree}C for the S0{sub 2}:CH{sub 4} ratio equal 1:1. XPS study confirmed that Mo is present in the form of Mo+4 and S in the form of S-2. The catalytic experiments of SO{sub 2} reduction with CH{sub 4} showed that for both Darco TRS and ROZ-3 supports, S0{sub 2} conversion increases with the temperature. Also, the catalyst having 20% loading of MoS{sub 2} on Darco TRS support shows the highest S0{sub 2} conversion over 10% or 15% loadings on Darco TRS. In contrast, for the ROZ-3 support, the catalyst having a 15% loading shows the highest activity. Additionally, it was observed that conversions of S0{sub 2} at 600{degree}C for both supports are comparable to each other when catalysts with 20% loadings are used; at lower temperatures, the activities are quite different with the conversions being higher for Darco TRS support

The content you want is available to Zendy users.

Already have an account? Click here to sign in.
Having issues? You can contact us here