Transient Porosity Resulting from Fluid–Mineral Interaction and its Consequences

The term porosity is very widely used in geosciences and normally refers to the spaces between the mineral grains or organic material in a rock, measured as a fraction of the total volume. These spaces may be filled with gas or fluids, and so the most common context for a discussion of porosity is in hydrogeology and petroleum geology of sedimentary rocks. While porosity is a measure of the ability of a rock to include a fluid phase, permeability is a measure of the ability for fluids to flow through the rock, and so depends on the extent to which the pore spaces are interconnected, the distribution of pores and pore neck size, as well as on the pressure driving the flow.This chapter will be primarily concerned with how reactive fluids can move through ‘tight rocks’ which have a very low intrinsic permeability and how secondary porosity is generated by fluid–mineral reactions. A few words about the meaning of the title will help to explain the scope of the chapter:1. “Fluid–mineral interaction”: When a mineral is out of equilibrium with a fluid, it will tend to dissolve until the fluid is saturated with respect to the solid mineral. We will consider fluids to be aqueous solutions, although many of the principles described here also apply to melts. The generation of porosity by simply dissolving some minerals in a rock is one obvious way to enhance fluid flow. Dissolution of carbonates by low pH solutions to produce vugs and even caves would be one example. However, when considering the role of fluid–mineral reaction during metamorphism the fluid provides mechanisms that enable re-equilibration of the rock, i.e., by replacing one assemblage of minerals by a more stable assemblage. This not only involves the dissolution of the parent mineral phases, but the …