Open AccessA Unified Ion Chromatographic System for the Determination of Acidity and Alkalinity
Author(s) -
Wenzhi Hu,
Kiyoshi Hasebe,
Alexander Iles,
Kazuhiko Tanaka
Publication year - 2001
Publication title -
analytical sciences
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.392
H-Index - 73
eISSN - 1348-2246
pISSN - 0910-6340
DOI - 10.2116/analsci.17.1401
Subject(s) - alkalinity , chemistry , counterion , conductometry , titration , ion chromatography , elution , potentiometric titration , chromatography , ion , inorganic chemistry , column chromatography , analytical chemistry (journal) , organic chemistry
A unified ion chromatographic (IC) system was developed for the determination of acidity or alkalinity. Separation column used was a reversed-phase ODS packed column, which had been modified by saturating it with lithium dodecylsulfate. A slightly acidified LiCl (50 mM LiCl and 0.05 mM H2SO4) aqueous solution was used as the eluent. By conditioning the separation column in this way, both H+ and Li+ ions became bound to the stationary phase. Dodecylsulfate groups with Li+ counterions acted as cation-exchange sites for the separation of hydrogen ions (free acidity determination). The remaining dodecylsulfate groups, with H+ counterions acted as a titrant, which reacted with basic species (total alkalinity determination). The acidity or alkalinity of each sample was measured according to the change in conductance from the eluent baseline level. A positive peak was observed from those samples with a free acidity greater than their total alkalinity, due to the separation/elution of free H+ ions. A negative peak was observed from those samples with a free acidity less than their total alkalinity. This was due to an equivalent amount of eluent H+ ions being re-supplied to the stationary phase while the "solid titrant" consumed by the acid-base reaction was regenerated. The retention time for the peak corresponding to the acidity or alkalinity was governed by the retention time for H+ ions in this IC system. Samples with a free acidity greater than 2.25 microM (tested by determination of H+ ions in pure water in equilibrium with atmospheric CO2) could be analyzed by this method. A very similar detection level was obtained for alkalinity (tested by analyzing standard aqueous NaHCO3 solutions). Aqueous solutions of some strong-acid/strong-base inorganic salts were found to be slightly alkaline. This was measured as a percentage, relative to an NaHCO3 solution at the same concentration. Solutions of NaClO4, Na2SO4, NaI, NaNO3, and NaCl, gave comparative alkalinity values of 8.75%, 1.83%, 0.42%, 0.35%, and 0.33%, respectively.