Preparation of Poly(N-isopropylacrylamide) Grafted Polydimethylsiloxane by Using Electron Beam Irradiation

A poly(N-isopropylacrylamide) (PIPAAm) grafted poly(dimethylsiloxane) (PDMS) surface was prepared as a temperature-responsive cell culture surface by using electron beam (EB) irradiation. Different chemical treatments to modify the bare PDMS surface were investigated for subsequent grafting of PIPAAm, and treatment conditions were optimized to prepare the temperature-responsive cell culture surface. The PDMS surface was initially activated to form silanol groups with conventional O 2 plasma or hydrochloric acid (HCl) treatment. Activated PDMS surfaces were individually immobilized with three different conventional silane compounds, i.e., 3-mercaptopropyltrimethoxysilane (MerTMS), 3-methacryloxypropyltrimethoxysilane (MetTMS), and 3-aminopropyltrimethoxysilane (AmiTMS). O 2 plasma treatment made PDMS more hydrophilic. In contrast, PDMS surfaces activated with HCl treatment were relatively hydrophobic. Observation of the activated PDMS surface modified with MerTMS, MetTMS, and AmiTMS indicated that these silane compounds had been favorably immobilized on plasma-treated PDMS surfaces. FT-IR/ATR analysis demonstrated that immobilized silane compounds enabled PIPAAm grafting on the PDMS surface. Cell attachment and detachment analysis also suggested that the PDMS surface sequentially treated with O 2 plasma and AmiTMS compound was a substrate appropriate for preparing a temperature-responsive cell culture surface by EB irradiation-induced PIPAAm grafting method. The intelligent surface may further be applied to mechanically stretchable temperature-responsive cell culture surfaces.