Potentiometric determination of cysteine with thiol sensitive silver-mercury electrode.

A potentiometric procedure for cysteine thiol group concentration monitoring in media generat- ing free radicals was developed using a thiol specific silver-mercury electrode. Electrolytic depo - sition of mercury on a silver wire and treatment with 20 mM cysteine in 0.5 M NaOH were used to produce the electrode. A silver-chloride electrode in saturated KCl was the reference. A glass capillary with 1 M KNO3 in 1% agarose gel was the liquid junction. The electrode responded to cysteine concentration in the range from 0.01 to 20 mM yielding a perfect linear relationship for the dependence of log (cysteine) versus electrode potential (mV), with b0 (constant) = -373.43 (mV), b1 (slope) = -53.82 and correlation coefficient r 2 = 0.97. The electrode potential change per decade of cysteine concentration was 57 mV. The minimal measurable signal response was at a cysteine concentration of 0.01 mM. The signal CV amounted to 4-6% for cysteine concentrations of 0.01 to 0.05 mM and to less than 1% for cysteine concentrations of 0.5 to 20 mM. The response time ranged from about 100 s for cysteine concentrations of 0.01 to 0.1 mM to 30 s at higher cysteine concentrations. The standard curve reproducibility was the best at cysteine concentra- tions from 0.1 to 20 mM. In a reaction medium containing cysteine and copper(II)-histidine com- plex ((His-Cu)2+) solution in 55 mM phosphate buffer pH 7.4 the electrode adequately responded to changes in cysteine concentration. Beside cysteine, the silver-mercury electrode responded also to thiol groups of homocysteine and glutathione, however, the Nernst equation slope was about half of that for cysteine.