The Effect of Bolt Locking Sequences and Anchor Bolt Design on Machine Tool

Machine tool is an important role in the industry because the mechanical components or products are manufactured by machine tools. The machine tools are assembled by components. The surface between two components is the combined or contact surface. Different bolt locking sequences will affect the combined surface in the machine tool. In this study, the SolidWorks software is used to create the CAD model. The finite element simulation is used the ANSYS software to simulate the influence of bolt locking methods on the combined surface of column structure and guideway and the fillet radius design on the deformation of anchor bolts. From the simulation results, the minimum deformation of the column is observed in the locking sequence from middle to both sides. The stress distribution of the combined surface is slightly difference of three locking methods. The simulation results of the guideway show that the minimum displacement of combined surface is obtained by using locking sequence from outside to the middle. The maximum displacement is obtained locking sequence from right to the left order. From the simulation results of anchor bolt, increasing the fillet radius of anchor bolt decreases the deformation of anchor bolts. The deformation of anchor bolts drastically decreases with increasing the fillet radius from R8 to R60. The simulation models and results provide the reference for the bolt locking sequence and anchor bolt fillet radius design.