Open AccessNumerical study of natural convection nanofluids flow in tilted cavities with a partially thermally heat source
Author(s) -
Djamila Benyoucef,
Samira Noui,
Afaf Djaraoui
Publication year - 2021
Publication title -
advances in mechanical engineering/advances in mechanical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.318
H-Index - 40
eISSN - 1687-8140
pISSN - 1687-8132
DOI - 10.1177/16878140211060682
Subject(s) - natural convection , heat transfer , rayleigh number , heat flux , thermodynamics , nanofluid , mechanics , finite volume method , materials science , convective heat transfer , physics , geometry , mathematics
Numerically, natural convection heat transfer of nanofluids in a two-dimensional tilt square enclosure was investigated, with a partial heat source embedded on the bottom wall subject to a fixed heat flux. The remaining portions of the horizontal bottom wall are assumed to be adiabatic, while the upper horizontal wall and the vertical ones are supposed to be at a relatively low temperature. Using the finite volume method and the SIMPLER algorithm, the governing equations have been discretized and solved. Simulations have been carried out for more than one nanoparticle and base fluid, a range of Rayleigh numbers ([Formula: see text] Ra [Formula: see text]), various values of heat source length and location (0.2 [Formula: see text] B [Formula: see text] 0.8 and 0.2 [Formula: see text] D [Formula: see text] 0.5, respectively), solid volume fraction ([Formula: see text]) as well as tilt angle ([Formula: see text]). The results indicate that the heat transfer performance increases by adding nanoparticles into the base fluid. An optimum solid volume fraction raises and reduces the heat transfer rate and maximum temperature of the surface heat source. respectively. Moreover, the results show a significant impact of the tilt angle on the flow, temperature patterns, and the heat transfer rate with a specific tilt angle depending to the pertinent parameters.