Investigation of productivity decline in inter-salt argillaceous dolomite reservoir due to formation damage and threshold pressure gradient: Laboratory, mathematical modeling and application

The inter-salt argillaceous dolomite reservoirs in the central region of China contain large abundance of oil resources with ultra-low permeability and porosity. However, the oil wells in this area show a very quick reduction with the decline of formation pressure. This article aims to investigate the main possible reasons that affect oil well productivity in the target oilfield. This study begins with analysis of capillary microscopic model, core stress sensitivity experiments, and non-Darcy percolation experiments. The impact of effective stress on permeability and porosity of the reservoir was revealed in this article. The novel productivity model and productivity evaluation model which couples stress sensitivity and threshold pressure gradient were proposed. The analysis of capillary microscopic model shows stress sensitivity of permeability to be much greater than that of porosity during the process of depressurization. The core stress sensitivity experiments results indicate that permeability and effective stress show index relationship while porosity and effective stress show binomial relationship. Damage rate and recovery rate of permeability and porosity were put forward to describe the degree of influence of stress sensitivity on permeability and porosity. The models were used to investigate the factors that affect single well productivity for the target oilfield. Application of the proposed model to this tight oilfield indicates that, the degree of influence of stress sensitivity is much greater than that of threshold pressure gradient. In addition, the greater the stress sensitivity coefficient and threshold pressure gradient are, the greater the productivity reduction will be.