Lessons From the Failure and Recall of an Implantable Cardioverter-Defibrillator

Multiple clinical trials have shown that a properly functioning implantable cardioverter-defibrillator (ICD) is capable of interrupting sudden death caused by ventricular tachyarrhythmias. Unfortunately, ICDs are complex medical devices, and they do not always perform as expected. For example, only 5% of ICD batteries last >7 years, and most dual-chamber ICD models must be replaced for battery depletion every 3 to 5 years.1 Normal battery depletion, however, is reliably predicted by routine follow-up methods before an ICD fails. In contrast, electronic malfunctions are unpredictable and may not be detected by standard follow-up techniques before an ICD is unable to deliver effective therapy. Thus, sudden cardiac arrest or death may be the first and only sign that an ICD has failed.2Recently, we reported the death of a 21-year-old patient who received a Prizm 2 DR model 1861 ICD pulse generator (Guidant, Inc) in 2001 to prevent sudden cardiac death resulting from hypertrophic cardiomyopathy.3 In March 2005, this young man experienced a witnessed arrest and could not be resuscitated. His ICD was returned to Guidant, which found that the device had failed during the delivery of a shock. The cause of failure was massive electronic damage caused by electrical overstress that occurred when a short circuit developed between a high-voltage wire and a tube used to test the housing during manufacturing (see the Figure). At the time of our patient’s death, Guidant had knowledge of 25 similar Prizm 2 DR model 1861 failures in patients, 3 of whom had required rescue defibrillation. Indeed, Guidant had first observed this mode of failure 3 years earlier, in February 2002, when 2 returned Prizm 2 DR pulse generators exhibited the same short circuiting that caused our patient’s device to fail. Guidant was sufficiently concerned about these failures that manufacturing changes were made …