Effect of the Addition of Oil Palm Mesocarp Fibers on the Physical and Mechanical Properties of a Polyester Matrix Composite

This work focuses on the assessment of oil palm mesocarp fibers as reinforcement in a composite material with an unsaturated polyester matrix. Several volume ratios of OPMF reinforcement (0 to 15%) were used, the fibers being distributed randomly. The resulting composite was characterized on the physical and mechanical aspects. Physically, the true and apparent densities were determined as well as the porosity rate. It appears that the addition of fibers further lightens the composite and increases the porosity. The water absorption rate of the different composites samples was evaluated. The more fibers the composite contains, the higher its water absorption rate. On the mechanical aspect, the bending modulus of elasticity, bending stress at break, and breaking strain were evaluated through a three-point bending test on all combinations. The same parameters were also evaluated for certain combinations by a unidirectional tensile test. It appears from this mechanical characterization that the volume fraction of 5% reinforcement has the highest specific modulus. Impact tests were performed on samples of this combination using several sizes of reinforcing fibers. Impact resistance is enhanced as the size of the inclusion increases. The Halpin-Tsai micromechanical model for randomly distributed short fiber composites was used for the inverse approach determination of the theoretical moduli of the matrix and OPMF, then in a direct approach to determine the elastic modulus of the composite at 7.5% reinforcement.