In-Line and Cross-Flow Coupling Vibration Response Characteristics of a Marine Viscoelastic Riser Subjected to Two-Phase Internal Flow

This paper studies the in-line and cross-flow coupling vibration response characteristics of a marine viscoelastic riser subjected to two-phase internal flow and affected by the combined effects of several parameters including the volume fraction of gas phase, sea water flow velocity, viscoelastic coefficient of the marine riser, axial tension amplitude, and the in-line and cross-flow coupling effect taking into account both the geometric and hydrodynamic nonlinearities. On the base of extended Hamilton’s principle for open systems, the dynamic equations of the marine viscoelastic riser subjected to the axial tension and gas-liquid-structure interaction are established. Two distributed and coupled van der Pol wake oscillators are utilized to model the fluctuating lift and drag coefficients, respectively. The finite element method is adopted to directly solve the highly coupled nonlinear fluid-structure interaction equations. Model validations are firstly performed through comparisons with the published experimental data and numerical simulation results, and the characteristic curves of the in-line and cross-flow vibration pattern, the in-line and cross-flow displacement trajectories, the in-line and cross-flow space-time response of displacement, and the in-line and cross-flow space-time response of stress versus different parameters are obtained, respectively. The results show that the volume fraction of gas phase, sea water flow velocity, viscoelastic coefficient of marine riser, axial tension amplitude, the in-line and cross-flow coupling effect, and multiphase internal flow velocity have significant influences on the dynamic response characteristics of the marine viscoelastic riser. Furthermore, the maximum displacements and stresses of the marine viscoelastic riser can be increased or decreased depending on the internal flow velocity, and the critical internal flow velocities result in the increase of mode order for different cross-flow velocities. It is also demonstrated that appropriate viscoelastic coefficients are very important to effectively suppress the maximum displacements and stresses.