Identifying Delay Time of Detonator for a Millisecond Blasting

Based on wavelet transform, the blasting vibration signals are analyzed here. For millisecond blasting, the blasting effect is mostly affected by the actual delay time. Local characteristics of the analyzed signals could be highlighted by the wavelet transform. The simultaneous initiation of large explosive quantity could be avoided by the use of multistage detonators, while the vibration resistance effect could be better. For the same level of detonator segment, the larger the arranged time interval, the less the possibility of initiation at the same time, which is not conducive to the vibration resistance. Therefore, it is suggested to use high-level detonators with detonating cord or high-precision digital electronic detonators to minimize the initiation error. Furthermore, by identifying the delay time using wavelet transform, the interval delay time of different detonator segments could be obtained. Moreover, the nominal delay time, actual delay time, and interval delay time are further compared and analyzed. It is suggested that the millisecond delay series of detonators should be selected in the whole section blasting, and the segment should be jumped as much as possible, so as to increase the secondary breakage time. Detonators with longer interval delay time should be avoided to the full.