English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Tensile stress-strain behavior coupled with fractography was used to investigate the weld-line strength of an injection molded 40 w% talc-filled polypropylene. The relationship between processing conditions, microstructure, and tensile strength was established. Fracture surface of the weld line exhibited skin-core morphology with different degrees of talc particle orientations in the core and in the skin. Experimental results also showed that the thickness of the core decreased and the thickness of the skins increased with increasing melt temperature and increasing hold pressure, which resulted in an increase of yield strength and yield strain with increasing melt temperature and increasing hold pressure. Finally, a three-parameter nonlinear constitutive model was developed to describe the strain softening behavior of the weld-line strength of talc-filled polypropylene. The parameters in this model are the modulus E, the strain exponent m, and the compliance factor β. The simulated stress-strain curves from the model are in good agreement with the test data, and both m and β are functions of skin-core thickness ratio

Effect of Melt Temperature and Hold Pressure on the Weld-Line Strength of an Injection Molded Talc-Filled Polypropylene