Preparation, Characterization, and Properties of Polyurethane-Grafted Multiwalled Carbon Nanotubes and Derived Polyurethane Nanocomposites

We incorporated hydroxyl groups into the polyurethane backbone and then used the “grafting to” approach to functionalize the multiwalled carbon nanotubes (MWNTs) via the esterification reaction between MWNTs and segmented polyurethanes (PUs). X-ray photoelectron spectroscopy (XPS) spectra showed that the sidewalls of MWNTs had been functionalized with acid treatment, and the amount of COOH increased with increasing acid treatment time. FTIR spectra further confirmed that PU was covalently attached to the sidewalls of MWNTs. The functionalized acid amount and the grafted PU amount were determined by thermogravimetric analyses (TGAs). Comparative studies based on SEM images of the PU-functionalized and chemically defunctionalized MWNT samples also revealed the covalent coating character. Dynamic mechanical analysis (DMA) of nanocomposite films prepared from PU and PU-functionalized MWNTs showed enhanced mechanical properties and increased soft segment . Tensile properties indicated that PU-functionalized MWNTs were effective reinforcing fillers for the polyurethane matrix